Technical Resource Hub

If the device powers up as expected, but is stuck on the Android boot screen, please follow these steps to re-flash (factory reset) the ProDVX panel. You will need to re-install the relevant booking app after performing the following steps.Unplug everything from the device, including the power source.Press and hold the "Volume +" button.Whilst holding this button, provide power to the device (can be both PoE or PSU).Keep holding the button until the Android Recovery menu appears. In this menu, navigate using the volume (+/-) buttons to the format/wipe system option.Select this option by long pressing the circular menu button next to it.After confirming the reset, reboot the device and check and confirm whether it does so without any issues.After step 7, please be patient as it can take up to 10 minutes for the panel to reload. When the process is complete, you'll have a blank Android panel. As this process completely resets the panel, you'll need to reconfigure the network - so if you're using Wi-Fi you will need to re-authenticate.If you have any further questions, please contact support@ascentae.com to log a support ticket. It helps to speed things up if you provide:ModelSerial NumberProof of Purchase

Model                                                   Best ForPWM-011Smaller setups (10-inch room panels)PWM-041Larger setups (15-inch room panels)If it’s an IAdea panel, these mounts will take care of it.Quick Start GuidesGrab the PWM-011 Manual or the PWM-041 Manual to see how easy setup is.

GoBright have released a Maintenance Mode option for their portal. Please note: The Interact display will not update to show the device as in maintenance mode. This will be a future release, but there is currently no release date that we can provide. This information was last updated on Wednesday 17/06/2026. What is Maintenance Mode?Need to take a resource out of action? Now you can. Setting a resource to maintenance blocks new bookings instantly. It’ll even give a heads-up to anyone who already had it booked so they can find an alternative resource. Sys Admins can also decide exactly who has the permissions to set maintenance for each location.Switching Maintenance OnThis is not enabled by default - so in this article, we'll guide you how to get up and running.This is done on a per-role basis - so, for example, you can restrict your portal so that only admins can put a resource into maintenance mode. Head to Settings > Users > Roles and enable the following:If you have multiple roles, you'll need to update each role accordingly. Putting a Resource Into MaintenanceTo put a resource into maintenance mode, head to Bookings > Maintenance:And then select the green 'Add Maintenance' icon.Once you have selected the correct location, you can select multiple resources - these include rooms, desks and also parking. Once saved, this is logged in Bookings > Maintenance. It's also displayed on the portal and you cannot book the resource. In this example, we've used a desk.For example when you select the resource:And on the map on your dashboard:Cancel MaintenanceIf the maintenance was completed before the scheduled time and the resource can be booked again, you can manually cancel it. Head back to Bookings > Maintenance and hit the X:As you can see, previous maintenance is shown but greyed out so there is still a log. Completed MaintenanceIf the scheduled maintenance time passes, you do not need to take any action as GoBright automatically updates to show it's finished and the desk is now bookable again.Remember: This is done on a per-role role basis and it needs to be enabled under Settings > Users > Roles. This is not enabled by default.If you have any questions regarding this setup, please log a ticket by contacting support@ascentae.com.

Dictate the summary of this article: Your browser does not support the audio element. If your ProDVX panel has GoBright pre-installed but you have no requirement to use this application, you can remove it from the panel.Completion Time: ~5-10minsFire up the panel and wait for the GoBright application to load. You will be presented with an activation code. Ignore the activation and perform the following gesture on screen to exit the kiosk. Removing your finger after each motion: This now takes you into the Android settings interface. You will not be prompted for a PIN as the device has not been activated.Under the Device section, select Exit and confirm the pop-upSwipe down twice / three times from the top of the screen and press the settings cogFind the Device section, select Apps and then find GoBright - Device Select this option and select Force Stop. On the same page, press Uninstall and confirm the pop-up. Now, on the bottom toolbar, press the triangle back icon 2 or 3 times to return to the home screen.After the above steps above have been carried out, GoBright has been uninstalled and you have a blank ProDVX panel.Now use the devices web browser to download the .apk file of your choice and install the relevant package. You also have the option of installing the .apk file from a USB device.Important: If you’re using a USB device, it must be formatted as FAT32. NTFS is not supported.If you have any questions, please log a support ticket by contacting Ascentae Support.     

Dictate the summary of this article: Your browser does not support the audio element. If you are installing an Interact on your site but do not want it to be free-standing on a desk, there are other options available.Under Desk MountProduct Code: INT1-MOUNT-DESKInfo: Optional extraIt's possible to mount the Interact so it's fixed under a desk. The design of the bracket means you can easily slide the Interact device in / out if required. This option saves desk space and reduces any risk of accidental damage if it was free-standing on a desk.Below are some images and dimensions to help you plan your install.Wall MountInfo: Included with the deviceSimply use the backplate that comes with the Interact device. Once the backplate is detached:Glass MountProduct Code: INT1-MOUNT-GLASSInfo: Optional extraIt's also possible to mount the Interact to a glass surface. When purchasing your Interact(s) please quote the correct quantity of the above product code. These come with double-sided 3M adhesive tape.Please quote the above product codes and quantities when requesting a quote from Ascentae.

Dictate the summary of this article: Your browser does not support the audio element. Digital signage can now be displayed using a web browser. The Web Player is on a view-only basis, so you can't make config changes on the screen itself. To use the web player you need to open the url link within the same server tenant. For example, on your Dashboard:However, when you switch to View:It will switch to:As you can see, it has switched from UK1B to UK1S, but you never leave your GoBright portal. In this instance, if you was to use UK1B the browser will alway show an activation code (valid for 12 months). However, when switching to UK1S the digital signage kicks in - as long as you have added the device on the GoBright portal.Please check the correct link on your GoBright portal as GoBright has several servers across different countries. In this instance, Ascentae is on UK1B, so it's UK1S. The full link for this example would be:https://uk1s.gobright.cloud/playerAscentae have tested this on the following browsers:                  Browser                        Version     Test Result     Approved?Chrome148.0.7778.179 (64-bit)👍🏻   YesEdge148.0.3967.83 (64-bit)👍🏻   YesFireFox151.0.2 (64-bit)👍🏻   YesOpera132.0.5905.11 (64-bit)👍🏻   YesSafari11.1 or higher(Tested by GoBright)   YesBrave1.90.124 (64-bit)👍🏻   YesWe tested the above in June 2026.Please ensure you are running the latest release of your browser.Lets Get StartedLogin to your GoBright portal at https://portal.gobright.cloudSelect the 4-square grid in the top-right and select 'View'Select the 'Devices' tab and look for the top level location. In this instance, there is just one. Right-click on the location and select Add > DeviceOn this page, enter a relevant name and hit saveYou will then be directed to a new page Now we need to activate your device. The activation code is shown on screenEnter your activation code & allow around 1 minute for the activation to kick-inIf you want to read the full GoBright article, it can be found here.If you have any questions, please log a support ticket.